1 Litre Mipa Basecoat VICROM chrome effect paint

inc. tax Tax based on United Kingdom.
Unavailable 1LVICROM

Mipa BC-Ready mixed Chrome Paint 1L (Very Thin) + 1L Base coat used as a ground coat for Mirror / Ghost effect Base coat used to create a special metallic effect similar with polished aluminium. Recommended for wheel rims, trims (skirting) and other decorative parts. Suitable also for complete respray of cars and motorcycles, or for spot repairs. Mixing Ratio : Vicrom : ready to used by spraying 1L Black Ground coat 1 : 1 with base coat thinners (can be supplied at an extra charge) Spray sliver Ground Coat first and you will get a chrome effect Spray Black Ground Coat First and you will get a mirror / ghost effect Ground Coat with other colours to make special effects Should be used by professions or someone who knows what they are doing as it can go horribly wrong or wonderfully Correct Spraying viscosity 20 C 14 - 16 s 4 mm DIN Application Spraying pressure Spraying nozzle No. of coats Air / Flow jar 3 - 4 bar 1.0 mm 1...

Description

Mipa BC-Ready mixed Chrome Paint 1L (Very Thin) + 1L Base coat used as a ground coat for Mirror / Ghost effect
Base coat used to create a special metallic effect similar with polished aluminium. Recommended for wheel rims, trims (skirting) and other decorative parts. Suitable also for complete respray of cars and motorcycles, or for spot repairs. 
Mixing Ratio : Vicrom : ready to used by spraying
1L Black Ground coat 1 : 1 with base coat thinners (can be supplied at an extra charge)
Spray sliver Ground Coat first and you will get a chrome effect 
Spray Black Ground Coat First and you will get a mirror / ghost effect 
Ground Coat with other colours to make special effects 
Should be used by professions or someone who knows what they are doing as it can go horribly wrong or wonderfully Correct 
Spraying viscosity 20° C 14 - 16 s 4 mm DIN
Application       Spraying pressure  Spraying nozzle   No. of coats 
Air / Flow jar   3 - 4 bar                        1.0 mm              1-2
HVLP              2.5 - 3.0 bar                  1 - 1.3 mm          1-2
Curing time/flush off time  2 - 5 min. between the coats 
Dry                                   Recoatable 
Object temp. 20° C          30 - 35 min. 
Object temp. 60° C          10 - 12 min.
Recommendations: Processing conditions: Do not apply below  10 °C and up to 75 % relative air humidity. Not suitable for direct application to old thermoplastic coats. Do not sand the substrate before the application of Mipa BC Vicrom ! Polish if necessary the non-painted areas
Overcoat within 4 days. Ensure to dry the undercoat lacquer at least 8 h at 20 °C or 30 min. at 60 °C. Force drying is recommended for larger areas . Mipa BC Vicrom gives a stable material, but to insure a homogeneous mixture after longer storage time, good agitation before use is recommended

Specification
Title 1 Litre Mipa Basecoat VICROM chrome effect paint
Brand Mipa Paints
Category Mipa Paints
SKU 1LVICROM
Condition new

BL Distrubution

[email protected]

Collections